Operating Parameters; Ip Phone 1120E; Ip Phone 1140E And Ip Phone 1150E - Nortel 1110 Fundamentals

Operating parameters

If the Expansion Module does not respond, and lines or features are
configured on keys 32 to 85, calls can be directed to those keys which the
user cannot access. This means that the IP Phone rings, but the call cannot
be answered. In such cases, the incoming call receives Call Forward No
Answer (CFNA) treatment.

IP Phone 1120E

The IP Phone 1120E does not support Shift key functionality.
If only one Expansion Module is configured in LD 11, but two or three
Expansion Modules are detected on an IP Phone 1120E, the second
and third Expansion Modules are ignored. An error message displays to
alert the administrator that the hardware configuration does not match the
administered configuration.
If two Expansion Modules are configured in LD 11, but only one Expansion
Module responds, the keys on the second Expansion Module are available
for call processing but are not accessible to the user. This means that
lines and features on keys 32 to 67 can cause the IP Phone 1120E to
ring, but there is no way to answer it. An error message displays to alert
the administrator that the hardware configuration does not match the
administered configuration.
If three Expansion Modules are configured in LD 11, but only one or two
Expansion Modules respond, the keys on the third Expansion Module are
available for call processing but are not accessible to the user. This means
that lines and features on keys 68 to 85 can cause the IP Phone 1120E
to ring, but there is no way to answer it. An error message displays to
alert the administrator that the hardware configuration does not match the
administered configuration.

IP Phone 1140E and IP Phone 1150E

If only one Expansion Module is configured in LD 11, but two or three
Expansion Modules are detected on the IP Phone, the Terminal Proxy
Server (TPS) assigns keys 50 to 67 to the second Expansion Module. The
third Expansion Module does not have keys assigned until it is configured
in LD 11.
An error message displays to alert the administrator that the hardware
configuration does not match the administered configuration.
If two Expansion Modules are configured in LD 11 but only one Expansion
Module responds, the TPS assigns keys 32 to 67 to the single Expansion
Module (using the Shift key functionality). An error message displays to
alert the administrator that the hardware configuration does not match the
Copyright © 2003–2007, Nortel Networks
.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Operating parameters 439