Upgrading The Firmware Using Bootc; Ip Phones Fundamentals; Nn43001-368 02.01 Standard - Nortel 1110 Fundamentals

554 Appendix I TFTP Server
manually configure the phone to point to that TFTP Server. The BootC
firmware carries out the upgrade. To initiate the firmware download task,
BootC must be triggered to run.
You can create the configuration file with a default file name, such as
1140E.img so you do not have to change the file name each time a new IP
Phone 1140E firmware load is released. However, if you take this approach,
be sure to rename the released firmware file (for example, 0625Cxx.bin) to
the default file name when the new firmware file is copied into the TFTP
Server root directory and to update the VERSION string in the configuration
file.
After the configuration file and the image file are in the TFTP Server root
directory, use
554)
Procedure 136
Upgrading the firmware using BootC
Step
1
2
3
4
Copyright © 2003–2007, Nortel Networks
.
Procedure 136 "Upgrading the firmware using BootC" (page
to upgrade the firmware using BootC.
Action
Hold down the [Up] and [2] keys, and while doing so, repower the
phone. When the phone restarts, it loads and runs BootC instead of
the application. When the Msg Waiting LEDs go off, you can release
the [Up] and [2] keys.
The following text menu on a white background appears:
If you do not see this message, you are in the wrong menu. Repeat
step 1. If BootC is damaged from a power reset, hold down the [Up]
and [3] keys to use the backup BootC.
When Nortel appears on the screen, press the soft keys 1,2,3,4
in sequence (left to right). BootC goes to manual configuration. If
you miss this step, and the phone begins to register to the TPS,
repeat step 1.
Follow the prompts to configure DHCP and other IP parameters or, if
DHCP and other parameters are already configured, just continue
pressing the 1 soft key or OK. The soft keys functions are listed
below:
• soft key 1 (below the LCD) is OK
•
soft key 2 is BackSpace
• soft key 3 is Clear
Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.01 Standard

Release 5.0 7 December 2007
11x0 IP Phone
Manual Configuration
Nortel