542 Appendix G Bluetooth wireless technology
Procedure 131
Switching between a wired headset and wireless headset
Step
1
2
3
4
Use
Bluetooth wireless technology headset.
Procedure 132
Unpairing a wireless headset
Step
1
2
3
Copyright © 2003–2007, Nortel Networks
.
Action
Double-press the Headset key to open the dialog box.
Press the Left/Right navigation key to select the Use BT headset
item.
A check mark indicates that the wireless headset is used. This
option is on by default.
To switch between a wired headset and a wireless headset, do one
of the following
•
Press the Enter key to clear the check box and to use the wired
headset.
•
Press the Enter key to select the check box and to use the
wireless headset.
Press the Exit soft key to exit to the main display.
Procedure 132 "Unpairing a wireless headset" (page 542)
Action
Double-press the Headset key to open the dialog box.
Press the Right navigation key to select the Paired: item.
Choose one of the following
•
If your headset is displayed in the Paired box, proceed to step 5.
•
If more than one device is paired, and your headset is not already
displayed in the Paired box, do the following
— Press the Right navigation key one or more times to highlight
the Paired: box. Press the Enter key to open edit mode.
— Press the Up/Down navigation keys to open the list. Press
the Up/Down navigations key to scroll in the list and highlight
your headset.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
—End—
to unpair the