Description - Nortel 1110 Fundamentals

28 Nortel IP Phone 2001
•
•
•
•
•
•
After you install and configure an IP Phone, if power to the phone is
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.

Description

The IP Phone 2001 uses the customer IP data network to communicate with
the Communication Server 1000 (CS 1000). The IP Phone 2001 translates
voice into data packets for transport using Internet Protocol. Use a Dynamic
Host Configuration Protocol (DHCP) server to provide information that you
can use for the IP Phone 2001 network and CS 1000 connections.
Figure 1 "IP Phone 2001" (page 28)
Figure 1
IP Phone 2001
Copyright © 2003–2007, Nortel Networks
.
Procedure 3 "Installing an IP Phone 2001 for the first time using DHCP"
(page 47)
Procedure 4 "Enabling Full Duplex mode" (page 54)
Procedure 5 "Checking Ethernet Statistics" (page 55)
Procedure 6 "Changing the TN of an existing IP Phone 2001" (page 56)
Procedure 7 "Replacing an IP Phone 2001" (page 57)
Procedure 8 "Removing an IP Phone 2001 from service" (page 57)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
shows the IP Phone 2001.