Nortel 1110 Fundamentals page 271

When a profile is selected, all other Settings tabs see the selected profile.
The name of the selected profile is shown in the lower right corner on each
tab.
From the Profiles screen you can do the following
•
•
•
•
•
•
When a new profile is created and selected, the values on all of the other
tabs are set to the defaults for this profile. Any value modified on any of the
other tabs are associated with this profile until another profile is selected.
To change settings on other tabs for this profile, select the tab you wish to
change. For example, go to the Server tab to modify the server settings.
Sounds
MVC 2050 can make sounds to indicate server connection or disconnection.
Sound files and sound settings are not saved when Profiles are saved, so
the use must program the sounds. Up to three sounds can be programmed
for use with audible notification of server connection or disconnection.
Following are descriptions of the events for which the sounds are used.
Descriptions of the events for which the sounds are used are as follows
•
•
•
Server unreachable The sound you select for this event plays when MVC
2050 loses contact with the server. The message "Server unreachable"
displays on the PDA screen.
Server unresponsive The sound you select for this event plays if MVC
2050 fails to connect to the server. The message Server unresponsive
displays on the PDA screen.
Server connected The sound you select for this event plays when MVC
2050 connects to a server.
Copyright © 2003–2007, Nortel Networks
.
create profiles
delete profiles
modify a profile name
change the profile used by the application
export profiles
import profiles
Server unreachable
Server unresponsive
Server connected
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Configuration 271