Configuring Secure Local Menu Through Full Dhcp - Nortel 1110 Fundamentals

328 Nortel IP Phone 1120E
Two ways to control the menu lock are as follows
•
•
The settings configured in the Lock Menu sub menu override the settings
received from the DHCP string.
For more information about 4. Lock Menu manual user settings, see
Appendix "Configuring the Local Tools menu" (page
Configuring Secure Local Menu through Full DHCP
Password protection is enabled during Full DHCP configuration if the
SECUREMENU parameter, or the PARTSECURE parameter are present at
the end of the S4 part of the Full DHCP string. If neither the SECUREMENU
parameter, nor the PARTSECURE parameter is present, password
protection is not enabled.
The SECUREMENU/PARTSECURE item is an optional parameter. If it is
present, then the full S4 string needs to be present, including the action
and retries. The S4 string is already present if the XAS support has been
configured through the DHCP. If XAS is not configured, you can still enable
password protection by setting the S4 IP address to 0.0.0.0 and by setting
the other fields to 0.
With Full DHCP, the vendor-specific or site-specific options must be configured
depending on the customers DHCP server configuration.
For further information about configuring Full DHCP, see Converging the
Data Network with VoIP Fundamentals (NN43001-260).
Copyright © 2003–2007, Nortel Networks
.
DHCP Secure Menu option—the IP Phone processes the secure menu
setting retrieved from the Full DHCP response.
Lock Menu option—double-press the Services key to access the Local
Tools menu. Press 4 on the dialpad to access the Lock Menu items,
or use the up/down navigation keys to scroll and highlight one of the
following Lock Menu options
— 1. Manual Secure Local Menu
— 2. Manual Partial Secure Menu
— 3. Manual Disable Secure Menu
— 4. DHCP Secure Menu
— 5. Lock Now
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
ATTENTION
473).