Nortel 1110 Fundamentals page 394

394 Nortel IP Phone 1150E
Key
Copy
Quit/Stop
Directory
Mute
Volume control keys
Supervisor Talk/Listen
key
In-Calls key
Agent default configuration
Table 51 "IP Phone 1150E keys and functions for default Agent key
configuration" (page 395)
default Agent key configuration. You can configure these keys for different
functions.
Copyright © 2003–2007, Nortel Networks
.
Function
Press the Copy Key to copy entries to your Personal Directory from other
lists, such as the Caller List, Redial List and Corporate Directory.
Press the Quit/Stop key to end an active application.
Pressing the Quit/Stop key does not affect the status of the calls currently
on your IP Phone.
Press the Directory key to access Directory services.
Press the Mute key to listen to the receiving party without transmitting.
Press the Mute key again to return to a two-way conversation.
The Mute key applies to Headset microphones. The Mute LED flashes
when the Mute option is in use.
Use the Volume control keys to adjust the volume of the headset, ringer,
and alerter/pager.
Press the volume key with the plus sign icon to increase volume; press the
volume key with the minus sign icon to decrease volume.
For Supervisor use. Press the Supervisor Talk/Listen key to participate in
an active conversation. The LED lights to indicate talk/listen mode is on. If
the LED is off, the Supervisor can only listen to an active conversation.
A headset must be connected to the Supervisor port on the IP Phone
1150E to use this feature.
Press the In-Calls key to answer incoming calls. This mirrors the key
function and state of the Primary DN key. The In-Calls LED lights when
the In-Calls key is in use.
shows IP Phone 1150E keys and functions for
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007