Nortel 1110 Fundamentals page 536

536 Appendix G Bluetooth wireless technology
5
6
7
8
9
Table 72 "1140e.cfg field name definitions" (page 536)
field names and definitions.
Table 72
1140e.cfg field name definitions
Field name
[FW]
DOWNLOAD_MODE
VERSION
FILENAME
PROTOCOL
SERVER_IP
SECURITY_MODE
Possible reasons Bluetooth wireless technology remains
disabled on the IP Phone after bootup
The following are possible reasons Bluetooth wireless technology remains
disabled on the IP Phone 1140E after bootup
•
Copyright © 2003–2007, Nortel Networks
.
If the IP Phone 1140E successfully retrieves the administrative
control and enables Bluetooth wireless technology, 3. Bluetooth
Setup appears in the Preferences menu.
Configure the IP Phone 1140E with a TFTP Server IP address so
the IP Phone can access the TFTP Server.
Press the Services key twice.
Press 3 on the dialpad to access the Network Configuration menu
or use the Up/Down navigation keys to scroll and highlight the
Network Configuration option. Press Enter.
Enter the TFTP IP address in the TFTP IP field.
Press the Apply&Reset soft key.
Field value
AUTO
0625Cxx
0625Cxx.bin
TFTP
xxx.xxx.xxx.xxx
0
The TFTP Server is down or is no longer present on the network.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
—End—
Definition
Section header for firmware download
information
Recommended setting. FW is downloaded when
the IP Phone FW version is older than the value
in the 1140e.cfg file VERSION field.
FW version
image file name, must match the file name of the
FW file
Download protocol must be TFTP
IP address of the TFTP server that downloads
the FILENAME file.
For future use.
lists the 1140e.cfg