Nortel 1110 Fundamentals page 190

190 Nortel IP Phone 2007
27
28
29
30
31
32
Copyright © 2003–2007, Nortel Networks
.
•
Force Half—Duplex mode is forced to Half Duplex on the network
Use the Right navigation key to scroll and highlight Disable Voice
802.1Q check box. Press the Enter key to switch this item on and off.
Use the Right navigation key to scroll and highlight VoiceVLAN box.
Press the Down navigation key to open the list box.
Use the Up/Down navigation keys to scroll and highlight one of the
following options:
• No VLAN
•
DHCP—VLAN ID is configured automatically to one of the values
received from the DHCP server
• LLDP MED—VLAN ID is configured automatically to the value
received from 802.1ab LLDP
• LLDP VLAN Name—VLAN ID is configured automatically to the
value received from 802.1ab LLDP
• Manual
If LLDP is disabled, LLDP MED and LLDP VLAN Name modes do
not appear in the list. If DHCP is disabled, DHCP does not appear in
the list.
Use the Right navigation key to scroll and highlight VLAN Filter
check box.
VLAN Filter appears dimmed if Disable Voice 802.1Q check box
is selected.
If the VLAN Filter is enabled, packets destined for the IP Phone port
are filtered on their MAC address and their VLAN tag. Untagged
VLAN packets and tagged VLAN packets that differ from the
Telephony VLAN ID are prevented from reaching the IP Phone port.
For information about VLAN tagging,
description" (page 461).
Use the Right navigation key to scroll and highlight Ctrl Priority
Bits box. Press the Down navigation key to open the list box. Select
Auto (default), 1, 2, 3, 4, 5, 6, or 7 from the list.
Ctrl Priority Bits option appears dimmed if Disable Voice 802.1Q
check box is selected.
Use the Right navigation key to scroll and highlight Media Priority
Bits box. Press the Down navigation key to open the list box. Select
Auto (default), 1, 2, 3, 4, 5, 6, or 7 from the list.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Appendix "802.1Q VLAN