Nortel 1110 Fundamentals page 336

336 Nortel IP Phone 1120E
6
7
8
Copyright © 2003–2007, Nortel Networks
.
Figure 36
Cable routing tracks
Install the Ethernet cable. Connect one end of the supplied Ethernet
cable to the back of your phone using the CAT5 connector (LAN
Ethernet port), and thread the network cable through the channel
(LAN Ethernet port).
If you are connecting your PC through the phone, a second CAT5
cable is required. Only one cable is included with the IP Phone
1120E package. Install the Ethernet cable connecting the PC to the
phone (optional). Connect one end of the PC Ethernet cable to your
phone using the CAT5 connector (PC Ethernet port), and thread it
through the channel. Connect the other end to the LAN connector
on the back of your PC.
CAUTION
Damage to Equipment
Do not plug any device into your IP Phone 1120E PC
Ethernet port other than a PC.
Connect additional cables. If applicable, plug in optional USB
devices. Connect the Ethernet cable to the LAN Ethernet connection.
If you are using an AC power adapter, plug the adapter into an
AC outlet.
Complete steps 1 to 9, as needed, before wall-mounting the IP
Phone.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007