Nortel 1110 Fundamentals page 418

418 Nortel IP Phone 1150E
12
13
14
15
16
17
Copyright © 2003–2007, Nortel Networks
.
Gateway—the default gateway for the IP Phone 1150E on the LAN
segment to which it connects
Use the Right navigation key to scroll and highlight S1 IP. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information:
S1 IP—the primary CS 1000 node IP address for the IP Phone
1150E
Use the Right navigation key to scroll and highlight Port.
S1 Port—a fixed value of 4100
Use the Right navigation key to scroll and highlight S1 Action.
Press the Enter key to start the edit mode. Use the dialpad to fill in
the information. Choose one of the following
• for TPS only, enter 1
• for TPS and Secure Multimedia Controller, enter 6 or 1
For more information about Secure Multimedia Controller, see
Secure Multimedia Controller Implementation Guide (NN43001-325).
Use the Right navigation key to scroll and highlight Retry. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information.
Retry—the number of times the IP Phone 1150E attempts to connect
to the server
Use the Right navigation key to scroll and highlight S1 PK.
S1 PK—the Private key of the Secure Multimedia Controller to which
the IP Phone connects
Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S1 PK Default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits, use a USB keyboard to enter the following:
# 1 = A
# 2 = B
# 3 = C
# 4 = D
# 5 = E
# 6 = F
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007