Installation And Configuration; Before You Begin; Startup Sequence - Nortel 1110 Fundamentals

2.4 m (8 ft), 240 VAC 10 amp, ANZ power cord AS-3,
Australia, New Zealand
250 VAC, Option 11C Standard European power cord,
Other EMEA, Kenya, Korea, Thailand, Indonesia, Vietnam,
India, Pakistan
3 m (9.9 ft) 125 VAC, Option 11C Swiss power cord
Switzerland
240 VAC, Option 11C UK power cord
Hong Kong, Ireland, United Kingdom, Singapore, Malaysia,
Bangladesh, Brunei, Sri Lanka
3 m (9.9 ft), 125 VAC, Option 11C Denmark power cord
Denmark
Argentina
1.8 m (5.9 ft), 10 amp, IEC320-C13
Japan
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 1120E
•
•
•
•
•

Before you begin

Before installing the IP Phone 1120E, complete the following pre-installation
checklist
•
•
Copyright © 2003–2007, Nortel Networks
.
"Before you begin" (page 331)
"First-time installation" (page 332)
"Configuring the IP Phone 1120E" (page 332)
"Startup sequence" (page 337)
"Installing the IP Phone 1120E" (page 338)
Ensure one IP Phone 1120E boxed package exists for each IP Phone
1120E you install. The package contains
— IP Phone 1120E
— handset
— handset cord
— 2.1 m (7-ft) CAT5 Ethernet cable
— Number plate and lens
— Getting Started Card
Ensure one Software License exists for each IP Phone 1120E you install.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 331
N/A NTTK15AA
NTTK16ABE6 NTTK16AB
NTTK17ABE6 NTTK17AB
NTTK18ABE6 NTTK18AB
NTTK22ABE6 NTTK22AB
N/A A0814961
NTTK26AAE6 N/A