Nortel 1110 Fundamentals page 292

292 Nortel IP Phone 1110
4
Copyright © 2003–2007, Nortel Networks
.
Figure 28
Stand cover removed
Connect the AC power adapter (optional). Leave the AC adapter
unplugged from the power outlet, connect the adapter to the AC
adapter jack in the bottom of the phone. Form a small bend in the
cable, and then thread the adapter cord through the channels in
the stand.
WARNING
Use your IP Phone 1110 with the approved Nortel AC
adapter (model number N0089601).
The IP Phone 1110 supports both AC power and Power over LAN
options, including IEEE 802.3af Power Classification 2. To use
Power over Ethernet, where power is delivered over the CAT5 cable,
the LAN must support Power over Ethernet, and an AC adapter is
not required. To use local AC power, the optional AC adapter can be
ordered separately.
Figure 29 "IP Phone 1110 connections" (page 293)
Phone 1110 connections.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
shows the IP