Nortel 1110 Fundamentals page 76

76 Nortel IP Phone 2002
6
7
Copyright © 2003–2007, Nortel Networks
.
By default, Full DHCP is configured on the IP Phone 2002.
Depending on the configuration requirements, you can change
the IP Phone 2002 configuration to allow the following IP address
assignments:
•
Static—enter all parameters
• Partial DHCP—IP Phone address, subnet mask, and default
Gateway are obtained from the DHCP server
• Full DHCP— (default) all parameters are obtained from the
DHCP server
A DHCP server and DHCP relay agents must also be installed,
configured, and running if you choose Partial DHCP, or Full DHCP
configuration. For more information about how to set up DHCP
servers for use with the IP Phones, see Converging the Data
Network with VoIP Fundamentals (NN43001-260).
Enter the following information:
Screen prompt
set IP
net msk
def gw
Enter the information for the primary Connect Server (S1) and the
secondary Connect Server (S2):
Screen prompt
S1 IP
S1 Port
S1 action
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Description
A valid IP Phone 2002 IP address.
A subnet mask.
The default Gateway for the IP Phone 2002
on the LAN segment to which it connects.
Description
The primary CS 1000 node IP address for
the IP Phone 2002.
This is a fixed value: 4100.
Choose one of the following:
• for TPS only, enter 1.
• for TPS and Secure Multimedia
Controller, enter 6 or 1.
For more information about Secure
Multimedia Controller, see Secure
Multimedia Controller Implementation
Guide (NN43001-325).