Nortel 1110 Fundamentals page 188

188 Nortel IP Phone 2007
16
17
18
19
20
21
Copyright © 2003–2007, Nortel Networks
.
Use the Right navigation key to scroll and highlight Retry. Use the
dialpad to fill in the information:
Retry—the number of times the IP Phone 2007 attempts to connect
to the server
Use the Right navigation key to scroll and highlight S1 PK.
S1 PK— the Private key of the Secure Multimedia Controller to
which the IP Phone connects.
Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S1 PK default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits from A to F, use the graphical keyboard or a
USB keyboard to enter the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
Use the Right navigation key to scroll and highlight S2 IP. Use the
dialpad to fill in the information:
S2 IP—the secondary CS 1000 node IP address for IP Phone 2007
IP Phone 2007 can support a primary (S1) and secondary (S1)
connect server. If you require IP Phones to register on multiple
nodes, see IP Line Fundamentals (NN43100-500).
Use the Right navigation key to scroll and highlight Port. Use the
dialpad to fill in the information:
Port—same as S1 port
Use the Right navigation key to scroll and highlight S2 Action.
Press the Enter key to start the edit mode. Use the dialpad to fill in
the information. Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Multimedia Controller, enter 6 or 1
For more information about Secure Multimedia Controller, see
Secure Multimedia Controller Implementation Guide (NN43001-325).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007