Nortel 1110 Fundamentals page 372

372 Nortel IP Phone 1140E
6
7
8
Copyright © 2003–2007, Nortel Networks
.
in the stand base marked with the handset symbol. See
"Cable routing tracks" (page
Figure 42
Cable routing tracks
Install the headset (optional). If you are installing a headset, plug
the connector into the RJ-9 headset jack on the back of the phone,
and thread the headset cord along with the handset cord through
the channels in the stand, so that the headset cord exits the channel
marked with the headset symbol. See
tracks" (page 372).
Install the Ethernet cable. Connect one end of the supplied Ethernet
cable to the back of your phone using the CAT5 connector (LAN
Ethernet port), and thread the network cable through the channel.
If you are connecting your PC through the phone, a second CAT5
cable is required. Only one cable is included with the IP Phone
1140E package. Install the Ethernet cable connecting the PC to the
phone (optional). Connect one end of the PC Ethernet cable to your
phone using the CAT5 (PC Ethernet port), and thread it through the
channel marked with the symbol. Connect the other end to the LAN
connector on the back of your PC.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
372).
Figure 42 "Cable routing
Figure 42