488 Appendix F IP Phone diagnostic utilities
Procedure 97
Executing TraceRoute
Step
1
2
3
4
5
Procedure 98
Accessing Ethernet Statistics
Step
1
2
3
Copyright © 2003–2007, Nortel Networks
.
Action
Select TraceRoute from the Network Diagnostic Tools submenu.
Press the IP soft key and enter the IP address to trace.
Press the Tracert soft key. The results of the TraceRoute appear
on the display.
Use the Navigation keys to browse the data. See
"TraceRoute data display screen" (page
Tip: Press the Tracert soft key again to stop the route tracing.
Press one of the following soft keys
•
Reset — to clear the data
•
Exit — to return to the Network Diagnostic Tools menu
Action
Select Ethernet Statistics from the Network Diagnostic Tools
menu. The Ethernet statistics appear on the display.
Use the Navigation keys to browse the data. See
"Ethernet Statistics data display page" (page
Press one of the following soft keys
•
Reset— to clear the data and reset the statistic counter
•
Exit — to return to the Network Diagnostic Tools menu
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
—End—
499).
—End—
500).
—End—
Figure 57
Figure 58