Using The 2. Local Diagnostics Submenu; Using 1. Ip Set&Dhcp Information; Using 2. Network Diagnostic Tools; Using 3. Ethernet Statistics - Nortel 1140E User Manual

Configuring Local Menu options

Using the 2. Local Diagnostics submenu

The Local Tools menu
following choices:
• "Using 1. IP Set&DHCP Information" on page 66
• "Using 2. Network Diagnostic Tools" on page 66
• "Using 3. Ethernet Statistics" on page 66
• "Using 4. IP Network Statistics" on page 66
• "Using 5. USB Devices" on page 67
Press the Return
Diagnostics submenu to return to the Local Diagnostics submenu. Use
the Return key in this way to quickly gather information and run tests
without exiting and reentering the Local Tools menu. For example, you
can check the Ethernet Statistics, then press
Network Diagnostics Tools to ping an IP address.
Using 1. IP Set&DHCP Information
The Network Configuration tool is used to view reports about IP set and
DHCP operation. This tool is for administrator use only.

Using 2. Network Diagnostic Tools

The Network Diagnostic Tools menu contains tools that are used to
diagnose network problems. This menu is for administrator use only.

Using 3. Ethernet Statistics

The Ethernet Statistics tool is used to view reports about Ethernet
operation. This tool is for administrator use only.

Using 4. IP Network Statistics

The IP Networks Statistics tool is used to view reports about network
operation. This tool is for administrator use only.
66
2. Local Diagnostics
soft key at any time while working with tools in the Local
submenu offers the
Return and enter the