Nortel 1110 Fundamentals page 191

33
34
35
36
37
Copyright © 2003–2007, Nortel Networks
.
Media Priority Bits option appears dimmed if Disable Voice
802.1Q check box is selected.
Use the Right navigation key to scroll and highlight Disable PC Port
check box. Press the Enter key to switch this item on and off.
Use the Right navigation key to scroll and highlight PC Port Speed
box. Press the Down navigation key to open the list box.
Use the Up/Down navigation keys to scroll and highlight one of the
following options:
•
Auto—Link speed is autonegotiated with the attached PC
• 10BT Full—Link speed is available for up to 10 Megabit Full
Duplex on the PC port
• 100BT Full—Link speed is available for up to 100 Megabit Full
Duplex on the PC port
Use the Right navigation key to scroll and highlight PC Port Duplex
box. Press the Down navigation key to open the list box. Use the
Up/Down navigation keys to scroll and highlight one of the following
options:
• Auto—Duplex mode is autonegotiated with the attached PC
• Force Full—Duplex mode is forced to Full Duplex on the PC
•
Force Half—Duplex mode is forced to Half Duplex on the PC
PC Port Duplex appears dimmed if the PC Port Speed option
is set to Auto.
Use the Right navigation key to scroll and highlight Disable Data
802.1Q check box. Press the Enter key to switch this item on and off.
Use the Right navigation key to scroll and highlight DataVLAN box.
Press the Down navigation key to open the list box.
The DataVLAN option appears dimmed if Disable Data 802.1Q
check box is selected.
Use the Up/Down navigation keys to scroll and highlight one of the
following options:
• No VLAN
• LLDP VLAN Name—VLAN ID is configured automatically to the
value received from 802.1ab LLDP
•
VLAN ID value—manual selection of VLAN ID from 1 to 4094
If LLDP is disabled, LLDP VLAN Name does not appear in the list.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 191