274 Nortel Mobile Voice Client 2050
Macro screen To enter a new macro name, or to select an existing macro
to modify or delete, select the New icon to the right of the list box.
To select an existing macro, tap the down arrow in the Macro list box and
make your selection.
To delete a selected macro, tap the Delete icon (the button to the right of
the list box).
Keys Once you have selected a macro name, tap the down arrow in the
Keys drop-down list to select a key to add to the macro. Press the Add
button to add the key.
Use the Pause key to insert a short pause in the macro. A pause introduces
a delay which may be required to access some Interactive Voice Response
(IVR) applications and the voice mail systems.
Contents A list of the macro contents appears in the Contents list box.
Once there are two or more entries in this box, use the up and down buttons,
which appear on the right of the box to move around the keystrokes.
To remove keystrokes from the Contents box, select the keystroke and
press the Remove button.
Preview To preview your macro in a single view, view the read-only field
under the Contents box.
Dialpad To enter numbers into your macro, select the Keys list box, press
the Add button, or use the numbers on the dialpad.
802.1p and DiffServ
MVC 2050 does not support 802.1p and DiffServ.
Global Packet Loss Concealment algorithm
The Global Packet Loss Concealment (GIPS) algorithm searches for
missing incoming packets. When one is found, GIPS algorithm stretches the
previous packet to conceal the loss and to remove noises associated with
the audio system starting and stopping at volume. Part of this concealment
alters the pitch of the sound to make it appear more natural. It assumes that
human is the type of sound, which permits better pitch changes. For more
information, see
MVC 2050 and WLAN
802.11b wireless ethernet networking
MVC 2050 uses an 802.11b WLAN interface.
Copyright © 2003–2007, Nortel Networks
.
www.globalipsound.com
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007