Nortel Communication Server 1000 - Nortel 1110 Fundamentals

Copyright © 2003–2007, Nortel Networks
.
Screen prompt
S1 PK
S2 IP
S2 Port
S2 action
S2 retry count
S2 PK

Nortel Communication Server 1000

IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 85
Description
To manually configure the PK, set the
Action Byte to 6. After you enter the PK,
apply the changes and then change the
Action Byte to 1, if required.
Default is ffffffffffffffff.
The Private key of the Secure
Multimedia Controller to which the IP
Phone connects.
If you use a Secure Multimedia
Controller, enter a 16-digit hexadecimal
number.
To enter ALPHA digits from A to F, enter
the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
The secondary CS 1000 node IP
address for the IP Phone 2002.
Same as S1.
Same as S1.
You are not prompted for S2 PK if S2
Action is set to 1.
Same as S1.
To manually configure the PK, set the
Action Byte to 6. After you enter the PK,
apply the changes and then change the
Action Byte to 1, if required.
Default is ffffffffffffffff.
The Private key of the alternate Secure
Multimedia Controller to which the IP
Phone connects.
If you use a Secure Multimedia
Controller, enter a 16-digit hexadecimal
number.
To enter ALPHA digits from A to F, enter
the following:
#1 = A
#2 = B
#3 = C