To Install Using The Ip Softphone 2050 Cd; Installing The Ip Softphone 2050; Additional Installation Steps For Windows 2000 - Nortel Ip Softphone 2050 Installation Manual

Hide thumbs Also See for Ip Softphone 2050:

Table of Contents

Chapter 3 Installing the IP Softphone 2050

Note: If you have previously installed a version of the IP Softphone 2050, you must

uninstall the old version (through Add/Remove Programs) before installing this version.

Note: Install the Nortel USB Audio Kit before installing the IP Softphone 2050. By doing

this, you are presented with the option of using the USB Audio Device during installation

of the IP Softphone 2050.

•

The IP Softphone 2050 can be installed running the installation wizard from the IP Softphone

2050 CD.

To install using the IP Softphone 2050 CD

Exit any programs that are running.

Disable any anti-virus programs that are running.

Insert the IP Softphone 2050 CD into the CD-ROM drive of your computer.

If the install wizard starts, go to step 6. If the install wizard does not start, go to step 4.

Double-click the My Computer icon, and then double-click the CD icon.

Double-click the Setup icon.

Follow the instructions on the display to complete the installation.

Run the IP Softphone 2050 Configuration Tool to assign a server address and to configure

audio peripherals.

You can access the IP Softphone 2050 from the Start menu at Start > Programs > Nortel > IP

Softphone 2050.

You can access the IP Softphone 2050 Configuration Tool from the Windows Control Panel.

Note: The installation files for the IP Softphone 2050 are not deleted by the installation

wizard. These files are stored in a folder named

C:\Program Files\Nortel\ClientInstall\IP Softphone 2050.

You can delete the installation files as they are not needed by the IP Softphone 2050.

If you are installing the IP Softphone 2050 on a computer using Windows 2000, you must:

•

install the Windows QoS Packet Scheduler

•

install the Nortel i2050 QoS Service

NN40050-300

Table of Contents