Filter-Policy Import (Rip View) - 3Com S7906E Command Reference Manual

If protocol is specified, RIP filters only the outgoing routes redistributed from the specified routing
protocol. Otherwise, RIP filters all routes to be advertised.
If interface-type interface-number is specified, RIP filters only the routes advertised by the specified
interface. Otherwise, RIP filters routes advertised by all RIP interfaces.
Related commands: acl, import-route, and ip ip-prefix.
Examples
# Reference ACL 2000 to filter outbound routes.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] filter-policy 2000 export
# Reference IP prefix list abc to filter outbound routes on Vlan-interface 1.
[Sysname-rip-1] filter-policy ip-prefix abc export Vlan-interface 1

filter-policy import (RIP view)

Syntax
filter-policy { acl-number | gateway ip-prefix-name | ip-prefix ip-prefix-name [ gateway
ip-prefix-name ] } import [ interface-type interface-number ]
undo filter-policy import [ interface-type interface-number ]
View
RIP view
Default Level
2: System level
Parameters
acl-number: Number of the ACL used for filtering incoming routes, in the range of 2000 to 3999.
ip-prefix ip-prefix-name: References an IP prefix list to filter incoming routes. The ip-prefix-name is a
string of 1 to 19 characters.
gateway ip-prefix-name: References an IP prefix list to filter routes from the gateway. ip-prefix-name is
a string of 1 to 19 characters.
interface-type interface-number: Specifies an interface by its interface type and interface number.
Description
Use the filter-policy import command to filter the incoming routes.
Use the undo filter-policy import command to restore the default.
By default, RIP does not filter incoming routes.
Related commands: acl and ip ip-prefix.
Examples
# Reference ACL 2000 to filter incoming routes.
<Sysname> system-view
[Sysname] rip 1
1-10