Remote I/O Terminal With 16 Relay Outputs: Drt2-Ros16 - Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual

Remote I/O Terminals with Transistors
Dimensions: DRT2-MD16 and DRT2-MD16-1
5-5-8

Remote I/O Terminal with 16 Relay Outputs: DRT2-ROS16

Common Specifications
Output Specifications (for One Relay)
116
115
Item
Communications power
supply voltage
Noise immunity
Vibration resistance
Shock resistance
Dielectric strength
Insulation resistance
Ambient temperature
Ambient humidity
Operating environment
Storage temperature
Mounting
Screw tightening torque
Item
Relay
Rated load
Rated carry current
Maximum switching
voltage
Maximum switching
current
Specifications
11 to 25 V DC
(Supplied from the communications connector.)
Conforms to IEC61000-4-4. 2 kV (power lines)
10 to 55 Hz, 0.7-mm double amplitude
2
100 m/s
500 V AC (between isolated circuits)
20 MΩ min. at 250 V DC
−10 to +55°C
25% to 85% (with no condensation)
No corrosive gases
−25 to +65°C
35-mm DIN Track mounting
M2 (communications connector lock screws):
0.26 to 0.3 N·m
M3 wiring screws: 0.5 N·m
M3 mounting screws: 0.5 N·m
Specifications
DRTA-NY5W-K
Resistive load
250 V AC, 2 A, 8-A common
30 V DC, 2 A, 8-A common
3 A (See note.)
250 V AC, 125 V DC
3 A
Section 5-5
43.8
29.8
49.6