Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 40

DRT2 Slaves
Slave Communi-
type cations
cables
Environ- Round
ment- communi-
resistive cations
Slaves connector
Analog Standard
Slaves rectangular
connector
Device combination
Basic Output Unit (OUT) + Expansion
Input Unit (IN):
Example: DRT2-OD16+XWT-ID16
Basic Output Unit (OUT) + Expansion
Output Unit (OUT):
Example: DRT2-OD16+XWT-OD16
Basic Output Unit (OUT) + Expansion
Output Unit (IN):
Example: DRT2-ROS16+XWT-ID16
Basic Output Unit (OUT) + Expansion
Output Unit (OUT):
Example: DRT2-ROS16+XWT-OD16
Name Model
Environ- DRT2-ID08C
ment-resis-
DRT2-ID08C-1
tive
DRT2-HD16C
Terminals
DRT2-HD16C-1
DRT2-OD08C
DRT2-OD08C-1
DRT2-ID04CL
DRT2-ID04CL-1
DRT2-OD04CL
DRT2-OD04CL-1
DRT2-ID08CL
DRT2-ID08CL-1
DRT2-HD16CL
DRT2-HD16CL-1
DRT2-OD08CL
DRT2-OD08CL-1
DRT2-WD16CL
DRT2-WD16CL-1
DRT2-MD16CL
DRT2-MD16CL-1
Analog Ter- DRT2-AD04
minals
DRT2-AD04H
DRT2-DA02
Tempera- DRT2-TS04T
ture Input
DRT2-TS04P
Terminals
I/O power supply to Expansion Unit
Required. (I/O power supply required for
both Units.)
Required. (I/O power supply required for
both Units.)
Required. (I/O power supply required for
Expansion Unit only.)
Required. (I/O power supply required for
Expansion Unit only)
Slave I/O con-
installa- nection
tion method
Screw- Round Cable with
mounted water- XS2 Con-
proof con- nector +
nector (for Sensor
XS2) with Con-
nector
DIN Track M3 termi- Terminal
nal block block con-
(detach- nection
able)
Section 1-2
Connect- Internal I/O power
ing power
devices supply
Shares Shares
communi- communi-
cations cations
power sup- power sup-
ply ply
Requires
external
power sup-
ply.
Con-
nected
with XS4@
connector.
Separate
power sup-
ply
required
for con-
nected
devices,
such as
sensors
and actua-
tors.
supply
19