Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 368

Analog Input Terminals
Setting Using the DeviceNet Configurator
1,2,3...
regarded as the rate of change. To prevent this occurring, use moving average
processing, which will set a longer sampling cycle.
Desired gradient
Fluctuation in analog value
Short sampling cycle Long sampling cycle
1. Double-click the icon of the Analog Slave to be set in the Main Window and
open the Edit Device Parameters Window. (From the Maintenance Mode
Window, click the right mouse button over the Slave icon and select Pa-
rameters and Edit.)
2. Select the Tab Page for the input where rate of change is to be set, and
select Rate of Change under the Function Choice heading.
Section 7-4
347