Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 290

Standard Environment-resistive Terminals
I/O Power Supply Status
Indicator
Component Names and Functions: DRT2-HD16CL and DRT2-HD16CL-1
name "1-A," the "1" indicates the connector number, and the "A" indicates that
it is an I/O status indicator.
Indicator Color
1-A Yellow
1-B Yellow
2-A Yellow
2-B Yellow
3-A Yellow
3-B Yellow
4-A Yellow
4-B Yellow
5-A Yellow
5-B Yellow
6-A Yellow
6-B Yellow
7-A Yellow
7-B Yellow
8-A Yellow
8-B Yellow
Note Although the connectors are numbered from 1 to 8, the input bits are num-
bered from 0 to 7. (The input bits are also numbered from 0 to 7 in the Config-
urator display.)
Indicator
AUX PWR Green
DeviceNet communications
connector
DeviceNet indicators
Top: MS indicator
Bottom: NS indicator
Rotary switches
Used to set node addresses.
Status
ON Input 0 is ON.
ON Input 1 is ON.
ON Input 2 is ON.
ON Input 3 is ON.
ON Input 4 is ON.
ON Input 5 is ON.
ON Input 6 is ON.
ON Input 7 is ON.
ON Input 8 is ON.
ON Input 9 is ON.
ON Input 10 is ON.
ON Input 11 is ON.
ON Input 12 is ON.
ON Input 13 is ON.
ON Input 14 is ON.
ON Input 15 is ON.
Color Status
ON I/O power is being supplied.
External power supply
connector
Connector 1 Connector 3 Connector 5 Connector 7
5 5
I/O power supply status indicator
Section 6-5
Meaning
Meaning
Output connectors
Connector 2 Connector 4 Connector 6
I/O status indicators
Connector 8
269