Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 579

Connectable Devices
Crimp Terminals for Communications Cables
PHOENIX CONTACT: A/AI Series
Cable type
For Thin Signal line
Cable
Power line
For Thick Signal line
Cable
Power line
Screwdrivers for Connectors
Model
XW4Z-00C Special screwdriver for DeviceNet connectors
SZF-1 Special screwdriver for DeviceNet connectors
Terminating Resistors
Model
Terminal-block Terminating Resistor, 121 Ω
DRS1-T
DRS2-1 Shielded Terminating Resistor (male plug), micro-size
DRS2-2 Shielded Terminating Resistor (female socket), micro-size
DRS3-1 Shielded Terminating Resistor (male plug), mini-size
Note A Terminating Resistor can also be connected to a T-branch Tap.
T-branch Taps
Model
DCN1-1C Includes 3 connectors (When used on a trunk line, 1 branch line can be con-
nected.)
A Terminating Resistor can be connected.
DCN1-3C Includes 5 connectors (When used on a trunk line, 3 branch lines can be
connected.)
A Terminating Resistor can be connected.
T-branch Connectors
Model
DCN2-1 Shielded T-branch Connector (for 1 branch line)
Power Supply Sharing Taps
Model
1485T-P2T5-T5 Required when connecting more than one power supply.
Reverse current prevention, ground terminal provided.
DCN1-1P One-branch tap for power supply.
Use this tap when connecting a communications power supply.
Two connectors and two fuses are standard.
558
XW4B-05C1-H1-D
XW4B-05C1-V1R-D
MSTB2.5/5-ST-5.08AU
AI 0.25-6BU
AI 0.5-6WH
A1-6
AI 2.5-8BU
Specifications
Specifications
Specifications
Specifications
Specifications
Connector type
XW4B-05C4-TF-D XW4G-05C1-H1-D
XS4B-05C4-T-D XW4G-05C4-TF-D
AI 0.25-8YE AI 0.25-8YE
AI 0.5-10WH AI 0.5-10WH
A1-10 A1-10
AI 2.5-10BU AI 2.5-10BU
Appendix D
Dedicated tool
CRIMPFOX
ZA3
Manufacturer (Supplier)
OMRON
OMRON 24 Service Co., Ltd.
Manufacturer
OMRON
Manufacturer
OMRON
OMRON
Manufacturer
OMRON
Manufacturer
Allen-Bradley
OMRON