Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 443

Temperature Input Terminals
Setting Using the DeviceNet Configurator
1,2,3...
422
1. Double-click the icon of the Temperature Input Terminal to be set in the
Main Window and open the Edit Device Parameters Window. (From the
Maintenance Mode Window, click the right mouse button over the Slave
icon and select Parameters and Edit.)
2. Select the Tab Page for the input where the Zone Count function is to be
set, and select Comparator under the Function Choice heading.
3. Click the Comparator Tab and select the desired type of zone from the
pull-down menu under the Zone Type field.
Section 7-6