Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 67

DeviceNet Remote I/O Communications
46
5. Click the OK Button.
6. In the same way as above, click the I/O Allocation (OUT) Tab and edit the
I/O allocations. Set to block 1, allocated 3200.
7. Return to the General Tab Page and click Download.
Note When Auto allocation as is registered. is selected in the General Tab Page,
each time the connection path is set, a message will be displayed indicating
that the current I/O allocations have been deleted because the connection
has been changed. To set the connection path, deselect Auto allocation as is
registered. before registering the Slaves.
Section 3-2