Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 9

Section 7 provides the specifications, terminal arrangements, mounting procedures, and connection
methods of Analog I/O Terminals. Information is included on types of I/O data that can be allocated,
allocation methods and procedures, and math operation processing. Setting methods using the Con-
figurator are also described.
Section 8 provides information on the time required for a complete communications cycle, for an out-
put response to be made to an input, to start the system, and to send messages.
Section 9 describes error processing, periodic maintenance operations, and troubleshooting proce-
dures needed to keep the DeviceNet Network operating properly. We recommend reading through the
error processing procedures in both this manual and the operation manual for the master being used
before operation so that operating errors can be identified and corrected more quickly.
Appendix A provides lists of DeviceNet explicit messages and their basic format.
Appendix B provides information on using masters from other companies and Slave device profiles
necessary for multi-vendor applications, including information on installing EDS files.
Appendix C describes restrictions on reading the total ON time and contact operation counter for all
Slaves at once.
Appendix D provides lists of standard models of DRT2-series Smart Slaves and connectable devices.
Appendix E shows the current consumptions of DRT2-series Smart Slaves.
Appendix F provides precautions for connecting two-wire DC sensors.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
x
About this Manual, Continued