Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 259

Connecting Communications Cables to Environment-resistive Slaves
Thick Cables with Connectors: Mini-size
238
Model
DCA2-5CN@@W1
DCA2-5CN@@F1
DCA2-5CN@@H1
DCN3-11
DCN3-12
Note 1. The boxes in the model numbers indicate the cable length in 1-m units. A
cable of 0.5 m, however, is indicated as "C5."
2. Standard DeviceNet cables are used for these connections, so the cables
cannot be used in environments subject to spattering, unless measures
are taken to protect the cables.
The following connectors with built-in terminating resistance are also avail-
able. A Terminating Resistor can also be connected to a T-branch Connector.
Model
DRS2-1
DRS2-2
DRS3-1
Description
Cable with shielded connec-
tors on both ends
Cable with shielded connector
(female socket) on one end
Cable with shielded connector
(male plug) on one end
Shielded T-branch Connector
(for one branch line)
Shielded T-branch Connector
(for one branch line)
An M12 connector is used for
the branch line.
Shielded Connector
(male plug, micro-size) with
terminating resistance.
Shielded Connector
(female socket, micro-size)
with terminating resistance.
Shielded Connector
(male plug, mini-size) with ter-
minating resistance.
Section 6-2
Details