Temperature Input Terminals
I/O Data
Temperature Data 1
(Instance 104 or 108)
Set the Poll settings to block 1, allocated 3300 (word CIO 3300).
Set the Cyclic settings to block 2, allocated 3500 (word CIO 3500).
6. Click the OK Button and use the following window to confirm that I/O has
been allocated correctly.
7. Click the OK Button, return to the General Tab, and click the Download
Button.
Temperature Data 1 is used to monitor the temperature input values. The tem-
perature input value is allocated as the default setting, but any one of temper-
ature input value, peak value, bottom value, top value, valley value or rate of
change can be selected as allocation data.
Note The comparator function can be used for the data allocated in Temperature
Data 1.
The following tables show the data format used for allocating data in the Mas-
ter. Data is allocated as two's complements.
Section 7-6
397