Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 450

Temperature Input Terminals
User Adjustment
4. To set the monitor value, click the Cumulated Count Tab, and input the de-
sired value in the Threshold Cumulated Counter field.
5. Return to the General Tab, click the Download Button, and then click the
Reset Button to reset the Unit.
6. Click the OK Button and exit the window.
This function can be used to compensate for offsets in the input values
caused by factors such as the characteristics and connection methods of the
input sensor.
Conversion data
0%
After
adjustment
Before
adjustment
Note 1. Temperature Input Terminals are properly adjusted at the factory before
shipment, so it is normally unnecessary to make adjustments. Use the
User Adjustment function only when absolutely necessary. OMRON is not
responsible for the results of user adjustments. If a mistake is made in the
adjustments, the adjustment data can be cleared to return to the factory
default settings.
2. The Temperature Input Terminal continues the temperature conversion op-
erations even after user adjustments have been made. It is possible for
temperature data values to change suddenly from previous values after the
user adjustments are made, so always consider the effects on the operat-
ing environment before applying user adjustments.
Temperature
100%
input value
Section 7-6
429