Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 417

Temperature Input Terminals
396
2. Click the General Tab, select the Temperature Input Terminal to be set,
and click the Advanced Setup Button.
3. Click the Connection Tab, and select User Setup. Select Use Poll Con-
nection, and then select the I/O data (pattern) from the pull-down menu
for the connection path. In the same way, select Use Cyclic Connection,
and then select any I/O data (pattern) from the pull-down menu for the con-
nection path.
4. Click the OK Button and exit the window.
5. Click the I/O Allocation (IN) Tab and edit the I/O allocations.
Select the Smart Slave to be set and click the Edit Button to display the
Edit I/O Allocate Window.
Section 7-6