Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 320

Overview of Analog Slaves
Flow of Data in Analog
Input Terminals
Flow of Data in
Temperature Input
Terminals
Moving average, scal-
Six types of data
ing enabled/disabled
Select two of the six types of data and
allocate as Analog Data 1 and 2.
Analog input
value 1
Peak value 2
Bottom value 3
Top value 4
Valley value 5
Rate of change 6
For Inputs 0 to 3, Analog Data 1 and 2 can be separately selected, as shown
in the following diagram.
Math
Input 0
processing
Math
Input 1
processing
Math
Input 2
processing
Math
Input 3
processing
In a Temperature Input Terminal, it is possible to select from six types of data
and switch the display mode. The display mode can be "normal display mode"
Analog Data 2
(allocated I/O data)
Analog Data 1
(allocated I/O data)
Default allocation:
Analog input value
The Comparator can be used
Comparator
with values allocated as Analog
Data 1
Analog Status Flags
(allocated I/O data)
Analog input
Analog Data 1
value
Analog Data 2
Other process-
ing results
Analog input
Analog Data 1
value
Analog Data 2
Other process-
ing results
Analog input
Analog Data 1
value
Analog Data 2
Other process-
ing results
Analog input
Analog Data 1
value
Analog Data 2
Other process-
ing results
Section 7-1
Allocated in Master.
299