Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 408

Temperature Input Terminals
4. Select a Slave in the Register Device list and click the Advanced Setup
Button to open the Advanced setting Window.
5. Click the Connection Tab, select User Setup, and select the type of con-
nection being used. Select Temp. data1 (4B/EU) from the pull-down menu
in the Con. (Connection) Path field for input and then click the OK Button.
Note The 1/100 display mode cannot be selected when a Bit-Strobe con-
nection is being used.
Section 7-6
387