6. EtherNet/IP Settings
This section describes the contents of the parameter and tag data link settings that are all
defined in this document.
6.1. Parameters
The parameters required for connecting PLC to Slave Terminal via EtherNet/IP are shown
below.
Item
IP address
Subnet mask
Network interface setting
6.2. Slave Terminal Configuration
The Slave Terminal configuration to use in this document is shown below.
Use the configuration described here when you perform 7.2.2. Parameter Settings.
NX Unit number
0
1
2
3
NX Unit number
PLC (Node 1)
192.168.250.1
255.255.255.0
-
Model
NX-EIC202
Coupler Unit
NX-ID4442
Digital Input Unit
NX-OD3256
Digital Output Unit
Analog Input Unit
NX-AD2603
0
1 2 3
6.EtherNet/IP Settings
Slave Terminal (Node 2)
192.168.250.2
255.255.255.0
Enable tag data links
Name
8