Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 179

Connector Terminals with Transistors
Components of the DRT2-OD16ML(X) and DRT2-OD16ML(X)-1
Output Indicators
Internal Circuits
DRT2-OD16ML(X) (NPN)
158
Top panel
(×10)
(×1)
Rotary switches
Set the node address.
Communications
connector
Connectors with Cable (MLX Models Only)
Name
I0 to I15
Note "m" is the first word allocated to the Remote Output Terminal.
V+
CAN_H
Physical
DRAIN
layer
CAN_L
V−
DeviceNet indicators and Output Indicators
Indicate the status of the Slave, communications,
and each output (lit when output is ON).
Front panel
DIN track
mounting hooks
Output connector (MIL)
Connects the 16 outputs via a MIL connector.
A cable (10 cm) with only an MLX connector
is included.
Green
Indicate the status of bits (contacts) 0 to 15 in word m. Lit
when output is ON; not lit when output is OFF.
Photo-
coupler
DC-DC
converter
(non-
isolated)
Photo-
coupler
Section 5-6
Bottom panel
Meaning
V1
Output (0 to 7)
G
Output (8 to 15)