Rep 4.4 Ela Hou - Frame Main Assembly - Xerox WorkCentre M20 Service Manual

5. Remove the PMO cover exit rear, Figure 2.
Figure 2 PMO cover exit rear removal
Replacement
Replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 4.3, REP 4.4

REP 4.4 ELA HOU - Frame Main Assembly

Parts List on PL 4.15 and PL 4.17
1
Removal
Remove 1 screw, then the
PMO cover exit rear.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the ELA - toner unit set, PL 9.10 Item 2 and the ELA Unit - OPC drum set, PL
9.10 Item 1.
2. Remove the ELA HOU - side cover assembly, REP 8.1.
3. Remove the ELA HOU - drive assembly, REP 4.1.
4. Remove the ELA HOU - fuser assembly, REP 10.1.
5. Remove the unit - LSU, REP 6.1.
6. Remove the PMO exit cover rear, REP 4.3.
7. Remove the MEC - exit assembly, REP 10.2.
December 2006
4-22
WARNING
WARNING
CAUTION
WorkCentre M20, 4118, FaxCentre 2218 Family