Troubleshooting The Mx960 Mics - Juniper MX960 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX960:

Table of Contents

Troubleshooting the MX960 MICs

Documentation

Description: The MICs are not functioning normally.

Check the status of each port on a MIC by looking at the LED located on the MIC

faceplate. For information about the meaning of LED states on different MICs, see the

MX Series Ethernet Services Routers Line Card Guide.

Check the status of a MIC by issuing the

MIC slots in the MPC are labeled

user@host> show chassis fpc pic-status

For further description of the output from the command, see the

MX960 Modular Interface Card Description on page 82

Maintaining MX960 MICs on page 462

Replacing an MX960 MIC on page 367

show chassis fpc pic-status

DPCE 4x 10GE R EQ

1x 10GE(LAN/WAN) EQ

DPCE 40x 1GE R EQ

10x 1GE(LAN) EQ

MPC Type 2 3D EQ

MPC 3D 16x 10GE

4x 10GE(LAN) SFP+

MX960 40GE DPC

MPC 3D 16x 10GE

4x 10GE(LAN) SFP+

Chapter 31: Troubleshooting Components

CLI command. The

, top to bottom:

CLI Explorer

Show Quick Links

Table of Contents