Table of Contents
Advertisement
Part 3
Customize Mode
Creating a Group
•
overwrites parameters in an existing user defined
Modify
group. It saves the parameters in the
parameters, using the selected group name. For example, if you
want to add a parameter to an existing group or delete one from
it, you can display the parameters, use
, and choose
<< Remove
parameter group under the same group name. When you use
this button, Annex Manager asks you to verify your changes.
•
uses the parameters in the
Create
group. When you use this button, the
displays.
•
displays a window explaining the
Help
Parameter Groups
•
removes the
Close
from your display.
Creating or Modifying a User Defined Group
You can create your own groups or modify existing ones with the
User-defined Parameter Groups
To create a new group:
1.
Move the pointer to the Options menu and select
Parameter Groups
The
User-defined Parameter Groups
Figure
12-1).
2.
Select the parameters you want in the new group from the
box and choose
Parameters
The parameters you choose appear in the
If you add a parameter and then decide you do not need
it in the group, select it in the
<< Remove
Chapter 12
Using and Creating Parameter Groups
Work Area
to store the amended
Modify
Work Area
Name Entry
command.
User-defined Parameter Groups
command.
.
window displays (see
Add >>
Work Area
.
Annex Manager User Guide
as new
or
Add >>
to define a new
window
User-defined
window
User-defined
.
.
Work Area
and press
12-7
Advertisement
Table of Contents
