It is important that you contact the provider of your ISDN service
to determine how they present MSN because this is important
when you setup your own MSN numbers. Alternatively you can
connect the manager cable to the manager port and the serial port
on your PC and then use Hyperterminal to connect you to BCC,
the router software inside the Nautica 200.
Connecting the manager cable is described in the printed
Installation guide that came with the product.
Once connected, it is possible to use the trace window to display
both CLI and MSN on received calls. This is explained in more
detail in the online BCC manual (Chapter 8 "ISDN
Supplementary Services").
Viewing MSNs
To display a list of the current MSNs, do the following:
1.
2.
3.
118814-A Rev. A
Select a unit in the main Nautica Wizard window
6-6).
Click on
Advanced > ISDN > MSN.
The ISDN MSN Table window
ISDN Setup
(Figure
11-1) appears.
Issue 1
(page
11-3