Nortel CallPilot Administrator's Manual page 87

3
To import or export CallPilot server settings
You can use the Import and Export buttons on the CallPilot Servers dialog
box to read in or write out CallPilot server credentials. Server credentials
are read from or written to a text file that can be used to pass information
between two different computers running the Directory Synchronization
extension.
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Result: A dialog box appears, requesting that you confirm this
action.
Click on the Delete button.
Result: The user is deleted. No changes are made to this user
during any future synchronization runs until the user is linked again.
Action
From the Active directory screen, right click and select properties
for any user.
Result: The active Directory user's property page appears.
Click on the CallPilot tab.
Result: The screen displays the user's status.
Click on the Servers button.
Result: The CallPilot Servers dialog box appears.
To export Server Settings: (The Administrator mailbox and password
are encrypted when exporting server settings.)
a. Highlight the server you want to export, and click Export.
Result: The Export CallPilot Snap-in Configuration file dialog
box appears.
b. Select the path and name of the file, and click Open.
Result: The file is saved as a .cfg file in the selected location.
The file can now be copied to another Active Directory server.
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007
To import or export CallPilot server settings 87
—End—