Nortel CallPilot Administrator's Manual page 128

128 Chapter 8 Backing up and restoring CallPilot information
2
3
4
What you need before you can configure a remote backup disk:
•
•
Types of backup devices
The Primary Server Tape is automatically listed when the CallPilot server
software is installed. If you want to back up the server to a disk device,
that device must be defined as a new backup device. You cannot define a
local disk as a backup device.
Predefined backup device
When the CallPilot server software is installed, only the Primary Server
Tape is predefined as a backup device.
IPE system backups
All IPE systems are shipped with one drive. There are several system
backup options for the server with one drive.
The following table describes your IPE system backup type options:
Backup type
Full System Backup
User Archive
Prompt Archive
AppBuilder Archive
Voice Form Archive
Copyright © 2007, Nortel Networks
.
This account does not need to be a member of the administrators
group and does not need to have any special administrative
privileges. It can be a member of any group with read/write access
permissions to a remote folder (device path).
Create and share a folder.
Add a new backup device using the shared folder.
Schedule a new backup using that device.
administrator access to the remote file server to configure a share for
access by CallPilot
the password of the local user account on the remote server
Description
Backs up the entire system.
Backs up all mailbox messages, personal information,
greetings, personal verifications, and PDLs.
Backs up all custom prompts.
Backs up all custom applications.
Backs up voice form configuration data and prompts
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007
—End—