Nortel CallPilot Administrator's Manual page 171

For the Message Archiving feature, the Subject is treated the same way as
stated previously for Message Forwarding Rules, but is extended to provide
a way for the administrator to easily sort and identify archived messages.
The To, From, Sender and CLID are displayed at the beginning of the
Subject.
The subject of an archived message appears as follows: To: user-name
[Mailbox#] From: sender-name [sender-CLID]: generated or original-subject
(see the following table.)
The following table is used to display the CLID and Sender's name:
CLID
Unknown
Unknown
Known
Known
Forwarding Restrictions
Message Forwarding Rule does not adhere to the Mailbox Class "Allow
users to send voice messages to non-CallPilot recipients" option. Should
the administrator want to prevent users from forwarding CallPilot messages
off of the system, the Message Forwarding Rule can be disabled.
CallPilot addresses such as external phones, fax, and distribution lists are
not supported by the Message Forwarding Rule. Only the following CallPilot
address types are accepted:
•
•
•
•
If a recipient address is not resolved by the Address Module, the message
is not delivered. You or the user must check that the recipient address is
correct. Event 55091 is sent to the event log.
Copyright © 2007, Nortel Networks
.
Sender's Name
Unknown (but with system
tag)
Unknown
Unknown
Known
Note: The CallPilot subject field supports a maximum of 255 characters.
If the original subject is longer than allowed, the remaining characters at
the end of the subject are discarded.
LOCAL - <local VPIM prefix><mailbox>@<local FQDN>
NMS - <NMS location's VPIM prefix><mailbox>@<local FQDN>
Open VPIM - VPIM=<VPIM shortcut><mailbox>/<remote
FDQN>@<local FQDN>
Remote Mailbox - <remote location's VPIM prefix><mailbox>@<local
FQDN>
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007
Message Forwarding Rule 171
Original Sender in the Subject
System
External
Unknown [CLID]
Sender-Name [CLID]