Nortel CallPilot Administrator's Manual page 77

There are many attributes within Active Directory, including the following
three examples:
•
•
•
Logical Operators:
•
•
•
Comparison:
•
•
•
•
•
Wildcard:
•
Examples of task filters:
Example 1:
(sn=a*)
In example 1, the task synchronizes all Active Directory users with last
names beginning with "A." This is a simple filter, which can produce
problems. If the filter does not specify that a telephone number must
exist, the task may attempt to synchronize an Active Directory entry
without a telephone number. This is an error condition if you are mapping
telephoneNumber to Mailbox Number.
Example 2:
(&(objectClass=user)(sn=*)(givenName=*)(areaCode=613))
Copyright © 2007, Nortel Networks
.
Attributes
sn (Surname)
givenName (Given Name)
telephoneNumber (Telephone number)
Operators
& (AND) returns entries matching all specified filter criteria
|(OR) returns entries matching one or more of the filter criteria
!(NOT) returns entries for which the filter is not true
= (is equal to)
>= (is greater than or equal to)
<= (is less than or equal to)
~= (is like or sounds like)
=* (exists)
* (Match 0 or more characters)
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007
Using Directory Synchronization 77