Chapter 9 Configuring Addressing Conventions And Messaging Service Defaults; Specifying Off-Switch Dialing Prefixes; Nortel Callpilot; Administrator Guide - Nortel CallPilot Administrator's Manual

Chapter 9
Configuring addressing conventions
and messaging service defaults
In this chapter
"Specifying off-switch dialing prefixes" (page 137)
"Handling mixed area or city codes" (page 138)
"Defining address prefixes for both DTT and DTF" (page 140)
"Enabling off-switch calls" (page 142)
"Changing messaging defaults" (page 143)
"Customizing system prompts" (page 146)
"Configuring delivery to DNs not associated with CallPilot mailboxes" (page
147)
Specifying off-switch dialing prefixes
For off-switch calls, CallPilot requires dialing information to translate a dialed
number into a dialable number. Dialing information consists of
•
•
Dialing information is used primarily to translate an external DN for playback
to the mailbox owner and the Call Sender feature
Copyright © 2007, Nortel Networks
.
information required to dial out from the local switch and access a
private ESN or public network
information required to distinguish certain area or city codes which
are used for either local calls or long distance calls, depending on the
destination DN

Nortel CallPilot

Administrator Guide

NN44200-601 01.11 Standard

5.0 9 November 2007
137