Securing The Premises; Nortel Callpilot; Administrator Guide; Nn44200-601 01.11 Standard - Nortel CallPilot Administrator's Manual

•
•
•
•
•

Securing the premises

Physical security threats include
•
•
When considering physical security, think not only of network media such as
cabling and servers but also of physical resources and access controls.
Copyright © 2007, Nortel Networks
.
When you configure a remote disk destination on your LAN, you map
the remote drive onto the CallPilot server.
Do not map a CallPilot server drive onto another server. This applies to all
connections to the server regardless of location (across the hall by means of
the LAN or across the country on the WAN).
When you configure a remote disk destination on your LAN, you create
Administrator as a user on the remote file server.
Do not add users or shares to a CallPilot server.
Ensure that the CallPilot server is connected inside the LAN firewall.
Install and configure one of the Nortel-supported third party antivirus
solutions.
Do not install third-party antivirus software unless approved by Nortel. For
information about the antivirus software packages that are approved by Nortel
for CallPilot, see Product Bulletin P-2007-0101-Global : CallPilot Support
for Anti-Virus Applications .
When you initiate a dial-up connection to use a third-party program such
as pcAnywhere to perform remote administration on the CallPilot server,
you need to enable the remote access modem on the server.
Enable the remote access modem on the CallPilot server only when needed
to enable a dial-up connection for remote maintenance of the server.
events that can physically damage equipment
ways in which equipment can be physically accessed to get to
information.

Nortel CallPilot

Administrator Guide

NN44200-601 01.11 Standard

5.0 9 November 2007
Securing the premises 101
ATTENTION
ATTENTION
ATTENTION
ATTENTION