Nortel CallPilot Administrator's Manual page 78

78 Chapter 5 Using Directory Synchronization
In Example 2, the task synchronizes any user with the area code 613.
This is more complex filter that ensures that only entries with names and
telephone numbers are synchronized. This filter might be used in a scenario
with one Active Directory and multiple CallPilot servers where the area code
determines the location of the user.
Example 3:
(&(objectClass=user)(sn=*)(givenName=*)(department
>=4000)(telephoneNumber=*))
In Example 3, all users in department numbers 4000 and above are
synchronized.
Example 4:
(&(objectclass=User)(|(telephoneNumber=4*)(telephoneNum-
ber=5*))(sn=*)(givenName=*))
In Example 4, the task synchronizes any user with a telephone number
beginning with 4 or 5.
To run a Synchronization Task
Before you run your first synchronization:
•
•
Example How to define one user:
When a Synchronization Task is configured and tested, the task can be run
at any time by following these steps:
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Ensure that the data in the external directory is consistent and accurate.
Synchronize one test user to ensure all settings are correct. You can do
this by setting the task filter, so that only one user is selected.
(telephonenumber=6133435479)
Action
From the Directory Synchronization screen, select Review and
Schedule Synchronization Tasks from the drop-down list.
Result: All configured tasks appear in the Synchronization Tasks
area. If a task is currently running, the task appears under "Current
Tasks"
Select the check box beside the task you want to run.
Click Run Now.
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007